Additional Images

X36567 Tune up kit 8756 with Coax Pumps (Red Valve body & White piston pumps)

X36567
Tune up kit X36567 for Taylor model 8756 with Coax Pumps
Pricing: $37.65
Qty:

Description

Tune up kit for use in Taylor 8756 and 8757 (non-horizon) machines

Fits Taylor Models

8756 and 8757.  

Included in this kit

3 014218 CAP-DESIGN-1.010"ID-6 PT
6 014402 O-RING-7/8 OD X .103W
4 016137 O-RING-3/8 OD X .070W
2 016272 O-RING-5/16 OD X .070W
2 018664 O-RING-1-3/8 OD X .103W
4 020050 RING-CHECK 2 IN OD X 1/2
6 020051 O-RING-2-1/8 OD X .139W
2 020249 DIAPHRAGM-PRESS. SW
2 021278 O-RING-13/16 OD X .139W
2 023262 BEARING-FRONT
2 032560 SEAL-DRIVE SHAFT
2 033215 RING-CHECK 1-1/4 ODX 3/8
2 038514 GASKET-DOOR-4" SHELL

Replacement Schedule

Taylor recommends you replace the tune up kit quarterly.  

Choose my Kit

Taylor has manufactured the model 8756 for decades so there are a few different tune up kits available. The 1st Thing to consider is what style of pump your machine uses, most 8756's use a piston style pump. The piston style pump has a piston inside a stainless steel cylinder that pumps the ice cream up to the freezing barrel.

If you have determined you have a piston style pump the next thing you need to know is what style of door seal your machine uses. The door seal is the large 4" rubber seal that goes in between the freezing cylinder and the dispensing head. The freezer door seal in this tune-up kit is displayed on the 2nd picture of this listing. If your door seal looks slightly different you should look at kit X49463-2.

If your machine uses a peristaltic pump you should navigate to our parts page for the Taylor model 8756P, P = Peristaltic

Shipping Information

  • Item Requires Shipping
  • 0.5 lbs.
  • W8.5000” x H5.5000” x L4.0000”

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.