Click on image to zoom

2006 Taylor C717 Heat Treatment - Single Phase, Air Cooled

2006 Taylor Model C717


Taylor C717 Soft Serve Freezer
2 Flavor with Twist - Heat Treatment


Offer all the popular soft serve variations from low to non-fat
ice creams or yogurt. Serve two separate soft serve flavors,
or an equal combination of both in a twist.

Heat Treatment System
Provides a daily heating and cooling cycle to safely maintain dairy
products up to two weeks before a complete disassembly and
cleaning is required.

Freezing Cylinder
Two, 3.4 quart (3.2 liter).

Mix Hopper
Two, 20 quart (18.9 liter).

Indicator Lights
Digital readout displays number of days until next brush cleaning is
required to assure product safety. Mix Low light alerts operator to
add mix. Audible alarm may be enabled to sound when mix is low.
When the Mix Out light flashes, the unit shuts down automatically to
prevent damage.

Touch Screen Controls
Microprocessor touch controls are embedded in durable tempered
glass panel. Multiple languages are selectable. Viscosity is
continually measured to dispense consistent quality soft serve
desserts. Soft lock out features improve reliability. Draw counter
allows operator to view number of servings dispensed.
Temperatures in the hoppers or freezing cylinders may be displayed
at any point of operation, in either Fahrenheit or Celsius. History of
temperatures and times during the last 366 heat cycles may be
viewed from the fluorescent display.

During long no-use periods, the standby feature maintains safe
product temperatures in the mix hopper and freezing cylinder.



Two dedicated electrical connections are required.

208-230 Volt - 1 Phase
Max Fuse Size (2) 35 amps
Min Circuit Ampacity Left 26 amps Right 23 amps

Manufactured to be permanently connected. Consult your local electrician for cord & receptacle specifications as local codes allow.

Beater Motor
Two, 1.5 HP.

Refrigeration System
Two, 9,500 BTU/hr. R404A.

Separate Hopper Refrigeration (SHR), One, 400 BTU/hr. R134a.

Air Cooled
Minimum 3” (76 mm) around all sides. Install the deflector provided to prevent recirculation of warm air. Minimum air clearances must be met to
assure adequate air flow for optimum performance.

Water Cooled
Water inlet and drain connections under side of base 1/2” FPT.


  • C717
  • C717
  • Taylor
  • New


Shipping Information

  • Item Requires Shipping
  • 810.0 lbs.
  • W48.0000” x H65.0000” x L40.0000”
  • This item will require a special quote for shipping charges.

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.