Taylor C713 Specs | Professional Soft Serve Machine

Electrical

Two dedicated electrical connections are required. See the Electrical chart for the proper electrical requirements.

Beater Motor

Two, 1.5 HP.

Refrigeration System

Two, 9500 BTU/hr compressors. R404A

Separate Hopper Refrigeration (SHR), One, 400 BTU/hr. R134A

(BTUs may vary based on application.)

Air Cooled

Minimum 3” around all sides. Minimum air clearances must be met to assure adequate air flow for optimum performance.

Water Cooled

Water inlet and drain connections out of rear 3/8” FPT.

Weights	Lbs.	Kgs.
Net	692	313.9
Crated	819	371.5
	Cu. Ft.	Cu. M.
Volume	66.5	1.88

Dimensions	In.	mm.
Width	25 7/16	646
Depth	36 3/16	919
Height	60	1524
Floor Clearance	4 3/4
*Mounted on standard casters.

Electrical	Maximum Fuse Size   Left Right	Minimum Circuit Ampacity Left Right	Poles (P) Wires (W)
208-230/60/1 Air	35 35	25 23	2P 3W
208-230/60/1 Water	35 35	25 23	2P 3W
208-230/60/3 Air	20 20	17 15	3P 4W
208-230/60/3 Water	20 20	17 15	3P 4W
This unit may be manufactured in other electrical characteristics.