Taylor 161 Spec Sheet | Taylor Model 161 Information

Specifications

Electrical

One dedicated electrical connection is required. See the Electrical chart for the proper electrical requirements. Manufactured to be cord connected.

Beater Motor

Two, 0.5 HP.

Refrigeration System

One, 4900 BTU/hr compressor (nominal rating). R404A

Separate Hopper Refrigeration (SHR), One, 300 BTU/hr. R134A

(BTUs may vary based on application.)

Air Cooled

Minimum 6” on the left and right, and 0” in the rear. Minimum air clearances must be met to assure adequate air flow for optimum performance.

Water Cooled

Water inlet and drain connections out of rear 3/8” FPT.

Dimensions	In.	mm.
Width	21 1/8	537
Depth	26 5/8	677
Height	28 1/8	715
Counter Clearance
Designed to rest on a plastic pad directly on counter top.