Taylor 430 Specifications

Specifications

Electrical

One dedicated electrical connection is required. Manufactured to be cord connected. See the Electrical chart for the proper electrical requirements.

Beater Motor

One, ¼ HP

Refrigeration System

One, approximately 4,000 BTU/hr compressor. R404A

(BTUs may vary depending on compressor used.)

Air Cooled

Minimum Clearance: 3” on both sides. It is recommended to place the rear of the unit agains the wall. Minimum air clearances must be met to assure adequate air flow for optimum performance.

Water Cooled

Water inlet and drain connections out of rear 3/8” FPT.

Weights	Lbs.	Kgs.
Net	176	79.8
Crated	212	96.2
	Cu. Ft.	Cu. M.
Volume	17.3	.49

Dimensions	In.	mm.
Width	16 7/16	418
Depth	27 11/16	702
Height	27 ½	699
Counter Clearance		108
*Designed to rest directly on counter top.

Electrical	Total Amps	Supplied with NEMA Cord
115/60/1 Air	16	5-20P
208-230/60/1 Air	9.5	6-15P
This unit may be manufactured in other electrical characteristics.

Taylor 430 Specifications