The 013102-27 is a heavy-duty 1 HP beater motor designed as an exact-fit replacement for Taylor soft serve machines. This single-phase, 208-230 volt motor delivers reliable performance for high-volume operations and is engineered to meet or exceed OEM specifications at a fraction of the cost.
Compatible Taylor Models
Soft Serve Machines: 336, 337, 338, 339
Verify your machine's motor specifications before ordering. If you need 1.5 HP, see our 021522-27L Motor instead.
Motor Specifications
| Part Number | 013102-27 |
| Horsepower | 1 HP |
| Voltage | 208-230 Volt |
| Phase | Single Phase (1Ø) |
| Dimensions | 15" long |
| Weight | 37 lbs |
| Mounting | Direct bolt-on replacement |
Signs Your Motor Needs Replacement
Replace your beater motor if you experience any of these symptoms:
- Tripping Reset Button: Repeatedly pressing the red reset button on your machine is the #1 indicator of motor failure
- Motor Won't Start: Beater assembly doesn't turn when machine is powered on
- Intermittent Operation: Motor starts and stops randomly during operation
- Burning Smell: Electrical burning odor coming from motor area
- Excessive Heat: Motor housing becomes extremely hot to touch
- Unusual Noises: Grinding, squealing, or humming sounds from motor
- Slow Operation: Beater turns slower than normal or struggles under load
- Overload Protection: Circuit breaker trips when machine starts
Troubleshooting Before Replacement
Before replacing the motor, check these common issues:
- Check Power Supply: Verify correct voltage at outlet (208-230V)
- Inspect Wiring: Look for loose connections or damaged wires
- Test Capacitor: A failed start capacitor can mimic motor failure
- Check Belt Tension: Overtightened belt can overload motor
- Inspect Gear Reducer: Failed gear box can cause motor to overwork
- Clean Ventilation: Blocked cooling vents cause overheating
Need help diagnosing? Call our technical team at 800-879-7839
Electrical Wiring
Important: This motor requires proper electrical installation by a qualified technician.
Wiring Configuration:
- Single-phase 208-230 volt connection
- Verify voltage matches your machine's electrical system
- Follow wiring diagram on motor nameplate
- Use proper wire gauge for amperage rating
- Ensure proper grounding for safety
Wiring Support: Our technical team can provide wiring guidance and diagrams. Call 800-879-7839 or email info@softserveparts.com
Installation Overview
- Disconnect power to machine and lockout/tagout
- Remove product from machine
- Disconnect motor wiring (photograph connections first)
- Loosen belt tension and remove drive belt
- Remove motor mounting bolts
- Remove old motor from frame
- Position new 013102-27 motor in mounting bracket
- Install mounting bolts and torque to specification
- Install drive belt and adjust tension properly
- Connect electrical wiring per diagram
- Test motor operation before loading product
Installation Time: Typically 1-2 hours depending on experience level
Additional Items You May Need
- Drive Belt - Replace when installing new motor
- 021286 Gear Reducer - Often replaced with motor
- Start Capacitor - Check and replace if needed
Why Choose Soft Serve Parts?
- ✓ Exact Fit Replacement for Taylor 013102-27
- ✓ Heavy-Duty Construction for High-Volume Use
- ✓ 57% Savings vs OEM ($621.45 vs $1,431.30)
- ✓ In Stock - Ships Same Day
- ✓ Expert Technical Support Available
- ✓ Made in USA
- ✓ Fast & Fair Shipping
Technical Support
Our team of soft serve experts can help with motor selection, wiring questions, installation guidance, and troubleshooting.
Contact Us:
Phone: 800-879-7839
Email: info@softserveparts.com
Hours: Monday-Friday, 8am-5pm PST
What to Have Ready When You Call:
- Your machine's model number
- Current motor nameplate information
- Description of the problem you're experiencing
- Photos of motor and wiring (if possible)