Taylor 632 Soft Serve & Shake Combination Machine
3-Phase · Water-Cooled · Single Shake / Single Soft Serve
The Taylor 632 is a commercial combination soft serve and shake freezer designed for operators who want menu flexibility without sacrificing floor space. This model delivers one full-capacity shake system alongside one soft serve system in a single footprint, making it ideal for restaurants, diners, drive-ins, amusement venues, and concession operations.
Configured as 3-phase, water-cooled, the Taylor 632 is well suited for high-demand environments, warm kitchens, or installations where consistent cooling and fast recovery are critical.
Product Capabilities
- Milkshakes
- Smoothies
- Low-fat and non-fat shakes
- Soft serve ice cream
- Frozen yogurt
- Custard
- Sorbet
Core Features
- Combination freezer with one shake barrel and one soft serve barrel
- Independent freezing systems for each product
- Simultaneous shake blending and soft serve dispensing
Freezing Cylinders
- Shake side: 7 quart (6.6 liter)
- Soft serve side: 3.4 quart (3.2 liter)
Refrigerated Mix Hoppers
- Two 20 quart (18.9 liter) mix hoppers
- Separate Hopper Refrigeration (SHR)
- Maintains mix temperature below 41°F (5°C) in Auto and Standby modes
Electronic Controls & Safety
- Softech™ viscosity-sensing controls for consistent product quality
- Mix Low indicator light alerts operators before product runs out
- Standby mode maintains safe temperatures during idle periods
Mechanical & Refrigeration Specifications
- Beater motor (shake): 1.0 HP
- Beater motor (soft serve): 1.5 HP
- Shake refrigeration: 11,000 BTU/hr (R404A)
- Soft serve refrigeration: 9,500 BTU/hr (R404A)
- Separate hopper refrigeration: 400 BTU/hr (R134a)
Electrical Requirements (3-Phase, Water-Cooled)
- 208–230V / 60Hz / 3-phase
- Two dedicated electrical connections required
- Permanent connection design
- Minimum circuit ampacity: 13A (left) / 15A (right)
- Maximum fuse size: 15A (left) / 20A (right)
Water-Cooled Configuration
- 1/2” FPT water inlet connection
- 1/2” FPT water drain connection
- Connections located under side of base
- Ideal for hot environments or continuous operation
Dimensions & Weight
- Width: 26-7/16"
- Depth: 33"
- Height: 59-1/2"
- Net weight: 675 lbs
- Crated weight: 785 lbs
- Mounted on standard casters
Available Options
- Cone dispenser
- Faucet options
- Refrigerated syrup rail (3-compartment) with panel spinner
- Side-mount syrup rail (2-compartment)
Summary: The Taylor 632 is a space-efficient, high-performance solution for operators who want both shake and soft serve capability in a single commercial machine. With independent freezing systems, refrigerated hoppers, Softech™ controls, and water-cooled reliability, it is built for consistent output and long-term performance.
Key Features
- Twin twist — serve two flavors or a swirl combo
- 3.4 qt freezing cylinders for commercial output & fast recovery
- 14 qt hoppers with SHR keep mix below 41ºF (5ºC)
- Standby mode maintains safe temps during downtime
- Integrated drain assembly simplifies rinse & cleaning
- Mix Low alert notifies staff to add mix
- Softech™ controls monitor viscosity for consistent product
- Optional syrup rail, cone dispenser & draw valve lock kit
- Air or water cooled configurations available
- Built for high-volume shops — strong resale & parts support
Technical Specifications
- Freezing cylinders: (2) × 3.4 qt (3.2 L)
- Mix hoppers: (2) × 14 qt (13.2 L) with SHR
- Beater motors: (2) × 1.5 HP
- SHR maintains mix below 41ºF (5ºC)
- Softech™ viscosity monitoring controls
- Integrated drain assembly for cleaning
- Electrical: 208–230V / 1 or 3 Phase (varies by model)
- Cooling: Air or water cooled — 3" side clearance required (air)
- Refrigeration: (2) × 9,500 BTU/hr (R404A)
- SHR refrigeration: 400 BTU/hr (R134a)
- Dimensions: 20-7/16" W × 30-3/16" D × 60" H
- Weight: 610 lbs (net)
What's Included
Everything you need to start serving product — included.
Every reconditioned machine from Soft Serve Parts ships with a full startup package—just plug it in, add mix, and start serving. No scrambling to find brushes or order seals after the machine arrives. We send the exact supplies our techs use in the field, so your machine is ready to run correctly from day one. You get the machine and the parts you actually need to operate it—not just the stainless steel shell.
Just add mix and power — no extra parts to buy.
- Brush kit — full set for teardown & cleaning
- Stera-Sheen® sanitizer — food-safe & NSF listed
- Lubricant tube — FDA-approved, equipment-safe
- Spare set of scraper blades
- Tune-up kit — fresh seals & o-rings for your model