On sale
Soft Serve Machines

2011 Taylor C713 | Soft Serve Machine | 3 Phase, Air Cooled

In Stock
SKU: c71333acm1
Sale price

Regular price $11,695.00
( / )
Shipping calculated at checkout.

2011 Taylor Model C713 (3 Phase, Air Cooled)

Limited Quantity In Stock

This 2011 Taylor C713 soft serve machine is one of the most widely used high-volume models in commercial frozen dessert operations. Manufactured by Taylor, the C713 is a 3-phase, air-cooled unit engineered for consistent performance in busy retail environments. Its efficient refrigeration system and robust mechanical design make it well suited for stores with steady to heavy demand.

The Taylor C713 is a twin-twist, gravity-fed soft serve freezer capable of dispensing two individual flavors or a combined twist. It is known for delivering smooth product texture, reliable overrun control, and repeatable results throughout the day. Operators value the C713 for its balance of output capacity and manageable footprint, making it a staple in frozen yogurt shops, ice cream stores, and high-traffic foodservice locations.

Air-cooled operation allows the C713 to be installed without the added complexity of water connections, simplifying setup in many commercial kitchens and storefronts. When properly ventilated, the machine maintains stable operating temperatures while supporting continuous service during peak hours.

Every reconditioned Taylor machine from Soft Serve Parts is subjected to a full inspection, cleaning, and operational test before shipment. Our technicians sanitize the unit, replace worn components as required, verify refrigeration and drive system performance, and run the machine under load to ensure consistent freezing and draw quality.

Your reconditioned 2011 Taylor C713 soft serve machine arrives ready for installation and operation—connect power, add mix, and begin serving soft-serve ice cream or frozen yogurt. Proven, durable, and easy to operate, the Taylor C713 remains one of the most trusted commercial soft serve machines for operators who prioritize reliability and long-term performance.

Electrical
Two dedicated electrical connections are required.

208-230 Volt - 1 Phase
Max Fuse Size (2) 30 amp
Min Circuit Ampacity: Left Side 25 Amps * Right Side 23 Amps

Manufactured to be permanently connected. Consult your local electrician for cord & receptacle specifications as local codes allow.

Beater Motor
Two, 1.5 HP.

Refrigeration System
Two, 9,500 BTU/hr. R404A.

Separate Hopper Refrigeration (SHR), One, 400 BTU/hr. R134a.

Air Cooled
Minimum 3” (76 mm) around all sides. Install the deflector provided to prevent recirculation of warm air. Minimum air clearances must be met to
assure adequate air flow for optimum performance.

Water Cooled
Water inlet and drain connections under side of base 1/2” FPT.

Please see our Shipping Policy for more information.