Load more
Freezer Door for Taylor 300 series single flavor soft serve machines.
Fits Taylor Models
320 and 321
How do I know if this part?
Inspect for cracks. Especially important where the stainless steel rod attaches to the plastic. If this part breaks off in the machine it can cause more expensive damage.
Taylor 754 / 774 / 794 Freezer Door
Three-Spout Beater Door — exploded view
Find the number on the diagram, then click that part number in the table below to go to the part.
| Item | Description | Part No. |
|---|---|---|
| 1 | DOOR - 3-SPOUT | X51532-12 |
| 2 | DECAL-DOOR | 021521 |
| 3 | VALVE A. - DRAW | X18303 |
| 4 | O-RING 7/8OD X .070W | 014402 |
| 5 | CAP-DESIGN | 014218 |
| 6 | PLUG-PRIME | 028805 |
| 7 | O-RING-PRIME PLUG | 016137 |
| 8 | HANDLE A. - DRAW | X33687 (not currently stocked) |
| 8a | DRAW HANDLE | 028804 |
| 8b | SCREW-ADJUST | 033662 |
| 8c | O-RING 1/4OD X .070W | 015872 |
| 8d | NUT-JAM | 029639-BLK (not currently stocked) |
| 9 | NUT-STUD FLAT LONG | 048928 (not currently stocked) |
| 10 | NUT-STUD FLAT SHORT | 048929 |
| 11 | ROD A. - PIVOT | X20683 |
| 12 | O-RING 5/16OD X .070W | 016272 |
| 13 | GASKET-DOOR HT 4" | 048926 |
| 14 | BEARING-FRONT | 050216 |
| 15 | BEATER A. - HELICORE | X31761 |
| 16 | BLADE - SCRAPER | 035174 |
| 17 | SHAFT-BEATER | 032564 |
| 18 | SEAL-DRIVE SHAFT | 032560 |
Notes, same as the PDF: a part number with no link is not currently stocked. Item 8b links to the 055092 Stainless Steel Adjustment Screw, which replaces Taylor 033662. Item 10 links to the 034383 Short Hand Screw. Item 16 links to search for 035174, as in the PDF.